Grey Cement CEM II/A-M (P-LL) 42,5 N

TITAN's CEM II/A-M (P-LL) 42,5 N is a composite cement that completes the range of Portland cements. Its enhanced properties offer high levels of early strength which make it ideal for voluminous concreting and prefabrication work. ΤΙΤΑΝ CEM II/A-M (P-LL) 42,5 N has provided solutions in major construction projects in concrete, mortar and grout applications.

This is a Portland type cement with pozzolana/limestone. It contains pozzolana (a quarried volcanic material) and ground limestone so as to provide a more sustainable cement with the added benefit of enhanced performance characteristics.

We, in Titan, are committed to constant improvement in the areas of environmental protection and sustainability, particularly through the use of recycled content, reduced waste and improved energy efficiency.

1. Product Applications

   In order to produce strong concrete using CEM II Portland cement, the mix's cement content must adhere to the ELOT EN 206 standard and the Concrete Technology Regulation 2016, which set out guidelines for the use of cement in concretes for various categories of exposure and adverse environmental conditions in order to achieve the planned longevity of the structure.

   All typical concrete additives (e.g. plasticizers, air-entraining agents, retarders) can be used with our CEM II cement.

2. Environmental Product Declaration (EPD), Declaration of Performance and CE Marking

   Our cements comply with the ELOT ΕΝ 197-1 harmonized European standard and are subject to third-party accreditation procedures by a notified EU body according to System 1+ for the Assessment & Verification of Constancy of Performance (AVCP).

   TITAN has published the Environmental Product Declaration (EPD) of cement, through an independent certified body.

   The EPDs, the Declaration of Performance of Performance on the key attributes of the product and the CE Marking can be found here.

   The CE Marking is placed on the packaging and/or the dispatch documents as per the Regulation for Construction Products.

3. Health and Safety

   Contact with wet cement, wet concrete or cement mix may cause irritation, dermatitis or serious alkali burns. The contact of cement dust with bodily fluids (e.g. sweat or eye moisture) may also cause irritation, dermatitis or burns. It entails a serious risk of eye damage. Wear suitable, impermeable protective clothing, gloves and eye/face protection. In case of eye contact, rinse off immediately with plenty of clean water and seek medical advice. After skin contact, wash off immediately with plenty of clean water. Keep out of reach of children. Contains chromium (VI). May cause allergic reactions, the risk of which is higher if the cement is used beyond the use-by date stated in the dispatch documents.