Grey Cement CEM II/B-M (P-LL) 42,5 N

TITAN's CEM II/B-M (P-LL) 42,5 N is a composite cement that completes the range of Portland cements. It is designed with a lower clinker content in order to reduce the embodied carbon footprint. Its enhanced properties offer high levels of early strength which make it ideal for mass volume concreting and light precast applications. ΤΙΤΑΝ CEM II/B-M (P-LL) 42,5 N has provided solutions in major construction projects in concrete, enhancing their sustainability.

In addition, the CEM II/B-M (P-LL) 42,5 N cement, enables the production of high durability concrete, benefiting by the use of pozzolana which contributes in reduced porosity and increases the steel reinforcement from corrosion.

1. Product Applications

   In order to produce strong concrete using CEM II Portland cement, the mix's cement content must adhere to the ELOT EN 206 standard and the Concrete Technology Regulation 2016, which set out guidelines for the use of cement in concretes for various categories of exposure and adverse environmental conditions in order to achieve the planned longevity of the structure.

   All typical concrete additives (e.g. plasticizers, air-entraining agents, retarders) can be used with our CEM II cement.

2. Environmental Product Declaration (EPD), Declaration of Performance and CE Marking

   Our cements comply with the ELOT ΕΝ 197-1 harmonized European standard and are subject to third-party accreditation procedures by a notified EU body according to System 1+ for the Assessment & Verification of Constancy of Performance (AVCP).

   TITAN has published the Environmental Product Declaration (EPD) of cement, through an independent certified body.

   The EPDs, the Declaration of Performance on the key attributes of the product and the CE Marking can be found here.

   The CE Marking is placed on the packaging and/or the dispatch documents as per the Regulation for Construction Products.

3. Health and Safety

   Contact with wet cement, wet concrete or cement mix may cause irritation, dermatitis or serious alkali burns. The contact of cement dust with bodily fluids (e.g. sweat or eye moisture) may also cause irritation, dermatitis or burns. It entails a serious risk of eye damage. Wear suitable, impermeable protective clothing, gloves and eye/face protection. In case of eye contact, rinse off immediately with plenty of clean water and seek medical advice. After skin contact, wash off immediately with plenty of clean water. Keep out of reach of children. Contains chromium (VI). May cause allergic reactions, the risk of which is higher if the cement is used beyond the use-by date stated in the dispatch documents.